CE Approved Autoclave Steam Sterilizer AISI 316L Class B Double Door

CE Approved Class B High Quality Autoclave Steam Sterilizer

Steam Sterilizer is mainly used for the sterilization, leak test, and washing of ampoule, syrup, and IV solution with small capacity. It adopts pressure steam as sterilizing medium to achieve uniform sterilization between 105℃~127℃. This sterilizer adopts the heating mode of displacement and exhaust from multi-points to ensure the the elimination of cold air in the chamber, uniform and rapid heating and eliminate the dead corner caused by the existing cold air. Leak test by vacuum and color water is adopted to improve the detection rate of waste after sterilization, meanwhile provides the documents system that meets 2010 version GMP requirement.

Sterilizer features:

•  User-friendly control panel
•  Software with 17 programs, 15 of which are pre-defined and all 17 can be customized 
•  Stainless steel AISI 304 panel
•  Possibility of having the maintanance area on the left or on the right side of the autoclave
•  Process piping made of stainless steel AISI 316L with tri-clamp fittings
•  High effective liquid ring vacuum pump for faster processes
•  Steam generator equipped with min/max water level indicator
•  The integrated thermal paper printer
•  Ergonomic working and loading position

Specifications:

 APPLICATION :

1. Hospital CSSD

2. Operating room

3. Medical centers

4. Outpatient care centers

5. Medical clinics

6. Emergency rooms

Keyboard and printer:

Multifunctional keyboard: Interface through virtual keyboard on the Touch Screen to select

 the process parameters and enter cycles programming data.

 The command enables the cycle parameters configuration through password within the safety

 range defined in the design.

Printer: The printer can be optionally installed on the frontal panel of the sterilizer and it enables

 to document the process by registering the time of the beginning of the process, time, temperature

 and pressure data of the inner chamber during the sterilization process, beginning of the cycle, 

 cycle phases, beginning and end of exposure phase and indication of signature place of operator

 and supervisor’s unit. 

 The printer consists of a plastic body and a lid that covers the paper reel. It has a thermal print 

 mechanism and uses paper reel to print.

Recorder: optionally installed in the sterilizer front panel. High quality graphic recorder for obtaining 

data such as: time, temperature and pressure. It presents configurable channels which allow the

 visualization of measures, scales or graphic bars. The recorder may be operated through operation keys or using a PC through a Compact Flash card or serial port.

Brochure load down from here

Medpharm medical large steam autoclave brochure.pdf